| Step | | Procedure & Parts & Tools |
| 1 |
|
PULL DOWN ON THE HANDLE RELEASE LEVER AND LIFT UP ON HANDLE TO REMOVE IT.
|
| 2 |
|
DISCONNECT THE WHITE POWER PLUG FOR NOW. REMOVE THE 6 SCREWS IN BACK OF HANDLE.
| Screwdriver-phillips |
|
|
| 3 |
|
LIFT UP ON THE BACK OF HANDLE TO SEPARATE FROM THE FRONT OF HANDLE.
|
| 4 |
|
LOCATE THE MAIN SWITCH (THIS IS THE ORANGE SWITCH). PULL THE TOP WHITE WIRE CONNECTOR AND THE TOP BLACK WIRE CONNECTOR TO DISCONNECT THE WIRES.
|
| 5 |
|
RECONNECT THE WHITE POWER PLUG FROM STEP 2. PLUG THE MACHINE IN. INSERT THE VOLT METER LEADS INTO THE WHITE AND BLACK WIRE CONNECTORS.(DOES NOT MATTER WHICH ONE GOES WHERE). SET THE VOLT METER TO VOLTAGE. ACTIVATE THE MACHINE. THE VOLT METER SHOULD READ APPROX. 120 VOLTS. REVERSE STEPS 1 THRU 4 TO REASSEMBLE MACHINE.
| Volt meter (True RMS capable) |
&Width=100)
|
|